Dynemech System Pvt. Ltd.

Owing to our expertise, we are introducing a broad array of Foundation Isolation - Zeiss CMM. The offered product range is designed with the aid of latest techniques by our professionals in compliance with the market standards. Extensively admired among customers all across the globe, this product range is provided in numerous specifications to choose from. Our honored customers can take this product range in different sizes at reasonable prices.

Features:

• Sturdy construction
• Excellent efficiency
• Less maintenance

 

Guide Lines:

• Pit should be 100% water proof; check ground water conditions.
• The inner surface of the pit should be clean, dry & smooth.
• As per the detailed layout supplied by Dynemech, place vibration damping plate set Dp Paste them to the pit base using – Pidlite SR-505 adhesive.
• Place filler foam in the gaps between the Insulation plate set Dp. Paste them to the pit surface.
• Place PVC on the entire pit surface and side walls. Seal the overlapping joints of the PVC sheet with adhesive tape so that the concrete water should not leak in to the pit base.
• Place 25mm thick wooden board layer and joint should be sealed with adhesive tape. This will act as a support for the initial concrete pour.
• Place another layer of PVC sheet on the pit base and the side walls joints sealed with adhesive tape.
• Pour concrete up to a depth of 150mmand allow it to dry, this will act as a compression plate. After drying the compression plate erect reinforcement and pour concrete in the rest of the concrete block volume. Concrete should be poured in layers of 300mm+300mm+350mm to complete a depth of 1100mm, allow each layer to dry and pour another layer.
• The concrete block and the pit tub should not come in contact with each other.
• Care should be taken that the concrete or concrete laced water should not leak in to the insulation plate area.
• The side gaps may be filled with rubberised cork scrap.

Isolated foundation for active vibration damping for power presses, forging hammers, engine test rigs, and passive vibration isolation of machining centres, grinding machines, measuring & testing equipments, laser cutters and microscopes.

The Isolated Foundation is required to reduce both active and passive vibrations. Vibration isolation mountings are required to reduce the transmission of vibration and shocks.
A foundation block or Vibration isolation mountings for high dynamic machines like power press, forging hammers, compressors, engine test rigs etc. is required in order to reduce the transmission of vibration and shock to nearby precision machines / building structures. To control the source of vibration disturbance through the use of resilient insulating materials is known as ACTIVE VIBRATION ISOLATION.

When it is not possible to prevent or sufficiently lower the transmission of shock and vibration from the source, a resiliently supported vibration insulating foundation block can be used for the PASSIVE VIBRATION ISOLATION of sensitive equipments like Machining Centres, Measuring and Testing Machines / Equipments etc.

Isolated Foundation lowers the centre of gravity of the machine foundation system and adds to the stability of the machine. Machine remains aligned during dynamic load changes and rapid movements within the machines.

Vibrations are present in every industrial application, involving machines. Increased speed, feed and cutting rates in precision machine tools and higher impact force and speeds in metal forming machines has invited the need for anchor free flexible installation of machines. The range of Dynemech anti vibration pads is designed taking in to consideration different dynamic behavior of modern machine tools. Damping either achieved through elastomeric mountings or spring isolators limits resonant response peaks when a machine momentarily passes through resonance such as during start-up. Vibration Damping is thus achieved as the property of the elastomeric, pneumatic or spring-viscous material and is further affected by the character of the dynamic oscillatory input signature of each machinery.

We provide complete vibration damping solutions ranging from screw support mounts, wedge mounts, vibration insulation plates, compac machinery mounts, spring isolators, rubber air springs, machinery raiser damping blocks, rubber sheet/pads, levelling mount, anti vibration rubber parts, rubber and rubber metal bonded vibration isolator, spring vibration isolators, anti vibration foundation pads, levelling mounts, cup mount, sandwich pad, all type of machine mounts, cushyfoot mountings, shock and vibration isolators, to foundation isolation/ insulation for all types of industrial machine tools.

We are well-equipped with all the necessary machines and testing equipment and adhere to strict quality standards in the manufacturing processes.

Anti Vibration Mounts / Mountings and Pads, Screw Support Mounts, Wedge Mounts, Vibration Insulation Plates, Spring Isolators, Rubber Air Springs, Machinery Raiser Damping Blocks, Rubber Sheet/Pads, Anti Vibration Pads, Anti Vibration Rubber Parts, Rubber And Rubber Metal Bonded Vibration Isolator, Spring Vibration Isolators, Anti Vibration Foundation Pads, Levelling Mounts, Cup Mount, Sandwich Pad, Machine Mounts, Cushyfoot Mountings, Shock And Vibration Isolators, To Foundation Isolation / Insulation.

For precision levelling as well as vibration reduction of CNC  machines, Power presses etc.Each pneumatic damping isolator consists of a leveling valve which is the load sensing and height controlling element. Systems are supplied with automatic height control valves, tubing and all other pneumatic accessories necessary for complete system installation.

Dynemech DLPM Mounts have minimal setting time. Long setting time using pneumatic isolators is not acceptable because precision measuring and positioning machines can suffer repeatability errors and through put losses.