Dynemech System Pvt. Ltd.

Application: Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-59(mm), Height-21(mm)

Load Capacity (Kg.):150 Kg/pc

Bolt Size:M16x2.0X100mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Adj.(mm):18

Working Temp Range °C:-16 to 90

Weight ( Kg.):0.3

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLM Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-59(mm), Height-21(mm)

Load Capacity (Kg.):150 Kg/pc

Bolt Size:M16x2.0X100mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Adj.(mm):18

Working Temp Range °C:-16 to 90

Weight ( Kg.):0.3

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech Screw Support Mounts Series DLK are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer both low frequency attenuation and stable machine levelling.

The DLK Series of Vibration damping and leveling mounts provide fast and easy installation of machines. These Anti-vibration mounts provide enhanced component finish/part tolerance and extend tool and machinery life. The machine mounts provide improved health protection and better structural safety. DLK series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate. Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. The vibration insulating Base pad is made of composite material at varying composition giving different natural frequencies to provide vibration damping solutions to all types of industrial machines. These vibration isolation plates are resistant to water, almost all the coolants, chemicals, fuels, lubricating oils used in the modern machine shop. These vibration insulating machine pads will not deform plastically, if the weight of machine does not exceed maximum load value of the insulation plates.

Application:Textile Machines, CNC Machines, Power Presses, Plastic Injection Moulding Machines Pressure Die Casting Machines, Printing and Packaging Machines, Compressors, Grinding Machines and All types of Heavy Industrial Applications.

Size :Dia-238(mm), Height-80(mm)

Load Capacity (Kg.):4000 Kg/pc

Bolt Size: M24X3.0X150mm 

Adjustment

range (mm):20

Working Temp Range °C:-From -15 to 80

Weight ( Kg.):8 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Red powder coating

• 
  

  Machine Base Mounts - Series DLKR

  
  

  Dynemech Machine Base Mounts Series DLKR are simple but  effective rectangular vibration dampers for machines with respective holes in the base. 

  With their sturdy construction, Series DLKR  supports both low frequency attenuation and stable precise machine levelling .

  
  

  The DLKR Series of vibration damping and leveling mounts provide fast and easy installation of machines along with large rectangular area support.

  
  

  Series DLKR  machine mounts provide enhanced component finish/part tolerance and extend tool and machinery life of all industrial and workshop equipment and machinery.

  
  

  DLKR series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate.

  
  

   Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. 

  
  

  The vibration dampening base pad is made of composite elastomeric material at varying composition contributing different natural frequencies to provide vibration damping solutions to all types of industrial machines. 

  
  

  These vibration isolation base pads  are resistant to water, almost all the coolants, chemicals, fuels, lubricating oils used in the modern machine shop. 

  
  

  Series DLKR  vibration insulating machine pads will not deform plastically, if the weight of the machine does not exceed maximum load value defined..

• Optimum quality
• High durability
• Rust resistance

• Compressors
• Tool Room Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Shaper
• Printing
• Textile Machines etc

Dynemech offers a variety of SCREW SUPPORT MOUNTS Series DLC to improve the design and performance of the machine tools to meet customer demand. Insulation plates having different load carrying capacities and different natural frequencies are assembled with screw support mounts to suit almost every industrial application.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-302(mm), Height-84(mm)

Load Capacity (Kg.):4200 Kg/pc

Bolt Size:M24x3.0X200mm Natural Frequency (Hz):18

Coeff. of Friction:0.8

Adj.(mm):18

Working Temp Range °C:-16 to 90

Weight ( Kg.):30

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DL Series AV mounts used for light to medium weight machines suited to levelling screw support or having tapped hole in the base. Dynemech DLS Series AV Mounts, developed in stainless steel finds application in pharmaceutical food and beverages processing and packaing units, medical equipment manufacturing and chemical processing industries.Provide vibration isolation with complete hygienic seal and corrsion resistance.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-55(mm), Height-21(mm)

Load Capacity (Kg.):150 Kg/pc

Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):0.3

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLM Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application: Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-59(mm), Height-21(mm)

Load Capacity (Kg.):150 Kg/pc

Bolt Size:M16x2.0X100mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Adj.(mm):18

Working Temp Range °C:-16 to 90

Weight ( Kg.):0.3

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

ht

DLKR series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate. Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. The vibration dampening base pad is made of composite elastomeric material at varying composition contributing different natural frequencies to provide vibration damping solutions to all types of industrial machines.

 Application:Dynemech Machine Base Mounts Series DLKR are simple but effective rectangular vibration dampers for machines with respective holes in the base. With their sturdy construction, Series DLKR supports both low frequency attenuation and stable precise machine levelling .

Size :200x200x58(mm)

Load Capacity (Kg.):5600 Kg/pc

Bolt Size:M20X2.5X150mm

Adj.(mm):15

Working Temp Range °C:-16 to 90

Weight ( Kg.):14

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Yellow

DLKR series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate.  Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. The vibration dampening base pad is made of composite elastomeric material at varying composition contributing different natural frequencies to provide vibration damping solutions to all types of industrial machines. 

 Application:Dynemech Machine Base Mounts Series DLKR are simple but effective rectangular vibration dampers for machines with respective holes in the base. With their sturdy construction, Series DLKR supports both low frequency attenuation and stable precise machine levelling .

Size :200x150x62(mm)

Load Capacity (Kg.):4000 Kg/pc

Bolt Size:M20X1.5X150mm

Adj.(mm):32

Working Temp Range °C:-16 to 90

Weight ( Kg.):08

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Yellow

Dynemech DLMS Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. DLMS Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application: Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting.

Size :Dia-59(mm), Height-21(mm)

Load Capacity (Kg.):150 Kg/pc

Bolt Size:M16x2.0x100mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):14 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Machines, Shaper, Printing and Textile Machines etc.

Dynemech DLM Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-276(mm), Height-43(mm)

Load Capacity (Kg.):4200 Kg/pc

Bolt Size:M20X2.5X150mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):14 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLM Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-276(mm), Height-43(mm)

Load Capacity (Kg.):4200 Kg/pc

Bolt Size:M20X2.5X150mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):14 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLM Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-276(mm), Height-43(mm)

Load Capacity (Kg.):4200 Kg/pc

Bolt Size:M20X2.5X150mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):14 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

• High strength
• Easy to install
• Rust resistance

• Textile Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Printing
• Textile Machines etc

Dynemech DL Series AV mounts used for light to medium weight machines suited to levelling screw support or having tapped hole in the base. Dynemech DLS Series AV Mounts, developed in stainless steel finds application in pharmaceutical food and beverages processing and packaing units, medical equipment manufacturing and chemical processing industries.Provide vibration isolation with complete hygienic seal and corrsion resistance.

Application: Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-276(mm), Height-43(mm)

Load Capacity (Kg.):4200 Kg/pc

 Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90

Weight ( Kg.):14

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLT Series Antivibration mountings are used in the machines which must be anchored to the floor along with levelling and vibration reduction. Bolts with thru holes are provided in the machine foot and anchor bolt passes from the machine foot, mount and anchored in the floor nut. An insulating disc is provided between the nut and the machine foot to prevent vibration from transmitting in the floor via the bolt. The dimple and the thru hole in the mount are provide as per the bolt specifications of the machine.

• Excellent finish
• Durable finish standard
• Corrosion-resistance

• Compressors
• Tool Room Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Shaper
• Printing
• Textile Machines etc

Dynemech Screw Support Mounts Series DLC are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer both low frequency attenuation and stable machine levelling.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-65(mm), Height-30(mm)

Load Capacity (Kg.):150 Kg/pc

Bolt Size: M12x1.75X100mm Natural Frequency (Hz):18

Coeff. of Friction:0.9

Adj.(mm):6

Working Temp Range °C:-16 to 90

Weight ( Kg.):0.5

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech DLMS Series Antivibration Mounts, developed in steel and stainless steel respectively are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer low frequency attenuation, stable machine levelling and vibration reduction. The flexible levelling screw accommodates uneven/sloped surface up to 5 degree. DLMS Series find application where corrosion resistant materials for hygienic, climatic and environmental reasons are required like in pharmaceutical, food and beverages processing and packaging units, medical equipment manufacturing and chemical processing industries.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia-112(mm), Height-38(mm)

Load Capacity (Kg.):550 Kg/pc

Bolt Size:M16x2.0X150mm Natural Frequency (Hz):8

Coeff. of Friction:0.8

Working Temp Range °C:-16 to 90

Weight ( Kg.):14 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Usage:Industrial

Dynemech DLT Series Antivibration mountings are used in the machines which must be anchored to the floor along with levelling and vibration reduction. Bolts with thru holes are provided in the machine foot and anchor bolt passes from the machine foot, mount and anchored in the floor nut. An insulating disc is provided between the nut and the machine foot to prevent vibration from transmitting in the floor via the bolt. The dimple and the thru hole in the mount are provide as per the bolt specifications of the machine.

Application:Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia:55mm, Height:21mm,

Load Capacity (Kg.):150 Kg/pc

Bolt Size:M16x300mm(Anchored Set) Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90 Through

hole:18mm
Weight:300gm

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

Dynemech Screw Support Mounts Series DLK are simple and effective vibration dampers for machines with respective holes in the base. These mounts offer both low frequency attenuation and stable machine levelling.

The DLK Series of Vibration damping and leveling mounts provide fast and easy installation of machines. These Anti-vibration mounts provide enhanced component finish/part tolerance and extend tool and machinery life. The machine mounts provide improved health protection and better structural safety. DLK series Anti-vibration mounts have steel body and are used for machines having mounting holes in the base. This leveling mount has a cover plate and dimpled bottom plate holding the insulation plate. Leveling is done by tightening the bolt which lifts the cover plate with the machine foot. The vibration insulating Base pad is made of composite material at varying composition giving different natural frequencies to provide vibration damping solutions to all types of industrial machines. These vibration isolation plates are resistant to water, almost all the coolants, chemicals, fuels, lubricating oils used in the modern machine shop. These vibration insulating machine pads will not deform plastically, if the weight of machine does not exceed maximum load value of the insulation plates.

Application:Textile Machines, CNC Machines, Power Presses, Plastic Injection Moulding Machines Pressure Die Casting Machines, Printing and Packaging Machines, Compressors, Grinding Machines and All types of Heavy Industrial Applications.

Size :Dia-92(mm), Height-50(mm)

Load Capacity (Kg.):580 Kg/pc

Bolt Size:M 12X1.75X100mm

Adjustment

range (mm):10

Working Temp Range °C:-From -15 to 80

Weight ( Kg.):1 Kg.

Material:Rubber+Cust Iron+Mild steel

Colour:Red powder coating 

Dynemech DLT Series Antivibration mountings are used in the machines which must be anchored to the floor along with levelling and vibration reduction. Bolts with thru holes are provided in the machine foot and anchor bolt passes from the machine foot, mount and anchored in the floor nut. An insulating disc is provided between the nut and the machine foot to prevent vibration from transmitting in the floor via the bolt. The dimple and the thru hole in the mount are provide as per the bolt specifications of the machine.

Application: Tool Room Machines, Plastic Injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Size :Dia:276 mm, Height:43mm,

Load Capacity (Kg.):4200 Kg/pc

Bolt Size:M24x300mm(Anchored Set) Natural Frequency (Hz):18

Coeff. of Friction:0.9

Working Temp Range °C:-16 to 90 Through

hole:22mm
Weight:16kgs

Material:Rubber+Cust Iron+Mild steel

Colour:Green & Dark Grey

• Precisely designed
• Low maintenance
• Long service life

• Compressors
• Tool Room Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Shaper
• Printing
• Textile Machines etc

• Excellent finish
• Durable finish standard
• Corrosion-resistance

• Compressors
• Tool Room Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Shaper
• Printing
• Textile Machines etc

• Optimum quality
• High durability
• Rust resistance

• Rugged construction
• Simple mounting
• Dimensional accuracy