Dynemech System Pvt. Ltd.

Dynemech Machinery Raiser Damping Blocks Series DR1-u:  are suitable for machines having tapped hole in the base.The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base.  Applications: Compressors, Tool Room Machines, Plastic injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Note: GST and freight charges not included.

Dynemech Machinery Raiser Damping Blocks Series DRC-u:  are suitable for machines having tapped hole in the base. The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base. Levelling is done by turning the bolt which lifts the cover plate along with the machine. Available both in 150 & 100 mm height. Compressors, Tool Room Machines, Plastic injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Note: GST and freight charges not included.

DYNEMECH Series DR , are suitable for machines having tapped hole in the base.The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base.

Series DRC, are suitable for machines having tapped hole in the base. The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base.

DRS series mounts are available in different heights as per the required ground clearance. The options of threading and dimple are available for levelling the machine. The vibration reduction is done using vibration isolation sheet of tuned natural frequency under the base of this mount.

Note- Freight and GST will be extra

Dynemech Machinery Raiser Damping Blocks Series DR6-s2:  are suitable for machines having tapped hole in the base.The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base.  Applications: Compressors, Tool Room Machines, Plastic injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Note: GST and freight charges not included.

Dynemech Machinery Raiser Damping Blocks Series DRC6-s2:  are suitable for machines having tapped hole in the base. The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base. Levelling is done by turning the bolt which lifts the cover plate along with the machine. Available both in 150 & 100 mm height. Compressors, Tool Room Machines, Plastic injection Moulding Machines, Pressure Die Casting Machines, Shaper, Printing and Textile Machines etc.

Note: GST and freight charges not included.

DRS series mounts are available in different heights as per the required ground clearance. The options of threading and dimple are available for levelling the machine. The vibration reduction is done using vibration isolation sheet of tuned natural frequency under the base of this mount.

Note: GST and freight charges not included.

Dynemech Machinery Raiser Damping Blocks offer easy and quick installation of CNC machines. These blocks offer both levelling and
vibration damping besides raising height of the machine for proper cleaning and repairing under it. Raiser Damping Blocks are assembled with insulation plates for vibration reduction. They provide fast and easy installation, flexible shop floor plan, enhanced component finish/part tolerance, extended tool and machinery life, improved health protection, better structural safety. Ideal for CNC Turning/Machining Centres, Cylindrical &
Centreless Grinding Machines, Precision Machine Tools. Help implement TQM norms for machine installation. Proper maintenance, cleanliness, vibration reduction results in enhanced machine tool reliability (zero breakdowns), reduced operation and life cycle costs which are the driving factors for adoption of Total Productive Maintenance (TPM) practices. Machines are installed at a height of 100-150 mm which help implement TPM norms for machine installation as recommended by IMTMA.

Dynemech Series DR, are suitable for machines having tapped hole in the base. The bolt rests over the dimple provided on the top face of the mount. Dimple size is provided as per the bolt diameter in the machine base

Specifications:

With our rich industry experience, we are engaged in offering superior quality Injection Molding Mounts. We offer these mounts in different sizes to address the demands of various industries. The offered mounts are perfectly manufactured using the best grade material and leading technology. Commended among customers for their offered attributes, these mounts undergo sequence of tests to assure their flawless delivery.

Features:

• Durable finish standard
• Anti corrosive
• Dimensional accuracy

Applications:

• Compressors
• Tool Room Machines
• Plastic injection Moulding Machines
• Pressure Die Casting Machines
• Shaper
• Printing
• Textile Machines etc

Specifications: